Bubble Machines in 8 Series and 6 Colors — Crowd Magnets That Need No Power
A bubble machine is the cheapest traffic magnet in the industry: it needs no staff, no ticket and no explanation. Turn one handle and a continuous stream of bubbles leaves the machine — the kind of exhibit that makes people stop, film and post. Eight series, six standard colors, unpowered or 220V.

Why a bubble machine pays for itself first
Plazas, communities and parks usually buy equipment in order of "how much attention does it get per square metre". Bubble play wins that ranking almost every time: it is visible from a distance, works for toddlers and teenagers alike, and produces the exact kind of footage visitors share on their own accounts.
Mechanically it is simple — a crank drives a rotating ring through a soap film, and airflow from the same motion releases the bubble. That simplicity is the point: it survives outdoor use, needs no electricity, and a venue can start with one unit and add a themed zone around it.







Rotating Bubble Machine — Vertical Bubble Curtain
A rotating arm lifts a ring through the soap reservoir and releases bubbles as a continuous vertical curtain around the machine. Children can stand inside the curtain, which makes it the most photographed unit in the range — and the strongest anchor for a paid bubble zone.
| Models | Rotating series |
| Colors | 6 standard (orange, red, yellow, blue, green, purple) |
| Power | Unpowered / 220V optional |
| Structure | Steel frame, HDPE body, stainless column, PC panels |
| Mobility | Caster wheels as standard |
| Best for | Plazas, malls, parks, photo zones |
- Bubbles form a full vertical curtain children can walk through
- Rotating motion keeps output continuous with no staff attendance
- The most photogenic unit in the catalogue — feeds social traffic
- Six standard colors, custom colors and logo available
- Caster-mounted, so it can be repositioned for events













Bubble Portal — Walk-In Bubble Frame
A rectangular portal with a soap-film frame: pull the film across the opening and a child steps through inside a giant enclosed bubble. The mechanised version draws the bubble automatically, so throughput stays high at busy events.
| Models | Portal / walk-in series |
| Colors | 6 standard |
| Power | Unpowered / 220V optional |
| Frame | Powder-coated steel, stainless uprights |
| Film | Replaceable soap-film frame and reservoir |
| Best for | Malls, FECs, festivals, science centres |
- Children stand inside a full-body bubble — a guaranteed queue
- Wide opening sized for a child plus a supervising adult
- Reservoir and frame are serviceable in minutes by floor staff
- Works as a paid photo moment or a free traffic puller
- Portable version available for event rental










4D Bubble Machine — Multi-Direction Output
A cylindrical head that releases bubbles in several directions at once, filling the air around the machine rather than a single stream. The 4D head suits open plazas where the goal is to make a large area feel occupied.
| Models | 4D series |
| Colors | 5 available (orange, red, yellow, green, purple) |
| Power | 220V recommended for continuous output |
| Structure | Steel frame, HDPE drum, stainless column |
| Coverage | Multi-direction, wide radius |
| Best for | Plazas, parks, festival grounds |
- Multi-direction head fills a wide area, not a single stream
- Drum design reads clearly from a distance — easy to find
- Continuous output option for high-traffic sites
- Sits on casters for event repositioning
- Bubble liquid consumption stays low thanks to ring-formed film











Fog Bubble Machine — Mist Cannon
A fan-driven cannon that projects a long mist plume carrying fine bubbles. It doubles as a heat-relief device, which is why it is the best-selling unit for summer outdoor venues and southern markets.
| Models | Fog cannon series |
| Colors | 6 standard |
| Power | 220V (fan-driven) |
| Structure | Steel frame, HDPE drum, stainless column |
| Effect | Long mist plume with fine bubble carry |
| Best for | Plazas, water parks, summer events |
- Fan projects mist and fine bubbles over a long distance
- Doubles as heat relief — sells in summer and hot climates
- Attracts visitors from across a plaza, not just nearby
- Six colors to match a venue palette
- Simple maintenance: fan, nozzle ring, reservoir











Giant Bubble Machine — Oversized Bubble Wand
Oversized wands and a wide film frame produce bubbles large enough for children to stand beside. The unit reads as a spectacle rather than a machine, which makes it the natural centrepiece for a themed bubble garden.
| Models | Giant bubble series |
| Colors | 6 standard |
| Power | Unpowered crank / 220V optional |
| Structure | Steel frame, HDPE drum, stainless column |
| Film | Oversized wand and wide frame sets |
| Best for | Themed gardens, malls, resorts |
- Produces bubbles large enough to dwarf a child on camera
- Reads as a spectacle — ideal as a zone centrepiece
- Slow, deliberate action keeps children engaged, not overstimulated
- Pairs naturally with the bubble portal for a two-station zone
- Six colors plus custom branding













Pull-Type Bubble Machine — Trolley Format
A handle-and-wheel format that a single adult can pull across a plaza or load into a van. Designed for operators who move the machine between pitches, or for rental businesses that need one unit to serve several sites.
| Models | Pull-type series |
| Colors | 6 standard |
| Power | Unpowered / 220V optional |
| Structure | Steel chassis, HDPE body, pneumatic-style casters |
| Transport | Pull handle, single-person move |
| Best for | Rental operators, markets, mobile events |
- One adult can move it — no vehicle or crew needed
- Built for rental businesses serving multiple pitches
- Same bubble output as the fixed units
- Compact footprint for narrow market lanes
- Colors and logo branding at standard pricing











DIY Bubble Machine — Hand-Crank and Assembly Kits
Hand-crank units where the child does the work, plus DIY assembly kits where the mechanism is exposed and can be taken apart. Used by science centres and schools as a cause-and-effect exhibit rather than purely as entertainment.
| Models | Hand-crank / DIY series |
| Colors | 5 available |
| Power | None — fully mechanical |
| Structure | HDPE body, stainless crank, visible mechanism |
| Skills | Cause and effect, mechanism assembly |
| Best for | Science centres, schools, kindergartens |
- Child-powered: the crank is the only energy source
- Exposed mechanism makes the physics visible and explainable
- DIY kits can be disassembled and rebuilt as a classroom activity
- No electricity, no motor, nothing to service
- Quiet enough for indoor galleries and libraries


















Spray Bubble Machine — Compact Reservoir Unit
A compact drum with an internal spray ring — the lowest-cost entry into bubble play and the easiest to place in tight retail or community spaces. The smallest unit in the range while still producing a continuous stream.
| Models | Spray series |
| Colors | 6 standard (orange, pink, yellow, blue, green, purple) |
| Power | Unpowered / 220V optional |
| Structure | HDPE drum, stainless column, PC top |
| Footprint | Compact — fits a shopfront or foyer |
| Best for | Communities, retail, small plazas |
- Smallest footprint in the range — fits a foyer or shopfront
- Lowest entry price, same visual effect at close range
- Six standard colors including pink for family venues
- Caster-mounted and light enough for one person to move
- Upgrade path to the portal or rotating series as traffic grows









Eight series, one mechanism
Every machine in the range is built on the same principle: a ring passes through a soap reservoir, a film forms across the ring, and airflow or motion releases the bubble. Because the mechanism is identical, the series differ in how the bubble is presented — vertically, through a portal, across a wide area, or at giant scale — not in how much technology they contain. That is why a single spare-parts kit covers most of the range.
The practical benefit for buyers is a single supplier, a single liquid specification and a single maintenance routine across an entire bubble zone, whether that zone is three machines in a mall or twelve across a park.
Choosing by venue type
- Shopping mall or FEC: rotating unit as the anchor, portal as the paid photo moment. Both fit under a standard atrium height and run unpowered.
- Public plaza or park: 4D or fog cannon for wide coverage; giant bubble unit as the landmark that people navigate by.
- Community or residential: spray unit for a compact footprint with minimal supervision.
- Rental business: pull-type units — one adult moves them, and the same machine serves several pitches per week.
- Science centre or school: DIY and hand-crank units, where the visible mechanism is the point of the exhibit.
What a full bubble garden looks like
A themed zone usually layers four roles: an anchor visible from the entrance, a photo moment people queue for, a spectacle that reads from across the space, and child-height stations around the edge so younger visitors are not competing with the crowd. We plan the layout from your site dimensions and return a station mix with itemised pricing.
Operation, liquid and maintenance
Bubble liquid
Use a concentrate formulated for ring-and-film machines rather than a spray solution. Consumption is low: the film forms on the ring, so liquid is not atomised into the air and lost. A venue typically refills once per operating session. We supply the recommended concentrate and mixing ratio with every order, and the same specification works across all eight series.
Daily routine
- Before opening: top up the reservoir, check the ring for dried film, wipe the drum.
- During operation: no attendance needed on unpowered models.
- After closing: drain or cover the reservoir, wipe the stainless column, clear any film residue from the ring.
- Monthly: inspect the crank bearing and ring mount, check caster brakes and fasteners.
- Seasonally: replace the ring and reservoir seal. These are stock items and are supplied in the spares kit.
Outdoor durability
Bodies are HDPE with a powder-coated steel frame and a stainless column, so the units tolerate rain and UV without rust at the seams. For coastal or heavily chlorinated environments we can specify 316 stainless on the column and fasteners. In freezing climates the reservoir should be drained and stored indoors over winter — the mechanism itself has no water trap that can crack.
Colors, branding and OEM
Six colors are stocked across the range: orange, red, yellow, blue, green and purple, with pink available on the spray series. Because the body is a printed HDPE drum rather than a painted surface, a custom color or pattern is a print change, not a repaint — which is why custom branding is priced at standard product level rather than as a one-off engineering job.
Typical branding requests we handle: a venue logo on the drum, a theme name replacing the standard mark, a color matched to an existing playground or mall identity, and multilingual instruction labels. For chain operators we can hold a consistent color and logo across repeat orders.
If you are planning a bubble zone as part of a larger play area, see indoor play areas for malls for how bubble units combine with ball walls and soft play, or read the interactive ball wall guide for the wall-based equivalent.
What does a bubble machine cost?
Price is driven by series (a spray unit and a rotating unit are different products), power option, and branding. Because the mechanism is shared across the range, the spread between the entry model and the anchor model is smaller than buyers usually expect — the difference is in presentation and coverage, not in complexity.
We quote line by line rather than publishing a headline figure, and we will tell you the bracket your project falls into on the first reply. Send the site dimensions, the number of stations you are considering and whether the zone is indoor or outdoor, and we will return a layout with itemised pricing, normally within one working day.
Eleven bubble units, eight mechanisms
The bubble range is built from a small number of mechanisms — crank, rope pull, fan and fog — combined at different scales. Some units need no power at all; the rest run on a standard 220 V supply and can be specified for your local voltage.
| # | Model | Drive | Footprint | Power | Weight | Play positions |
|---|---|---|---|---|---|---|
| 01 | Bird Nest Bubble Machine Unpowered | Hand crank | H 2800 / 3000 mm, base 300 x 600 x 700 mm | None — mechanical | — | 1 |
| 02 | Fog Bubble Machine | Electric | Dia. 1200 mm, H 1800 mm | 220 V / 450 W | 97 kg | 4 |
| 03 | Hand-Crank Bubble Machine | Crank-assisted | Dia. 1200 mm, H 1000 mm | 220 V / 25 W | 68 kg | 4 |
| 04 | DIY Bubble Table | Manual tools | Dia. 1200 mm, H 500 mm | None | 20 kg | 4 |
| 05 | Pull-Type Bubble Machine | Rope pull | 1650 x 650 x 1900 mm | 220 V / 30 W | 105 kg | Group |
| 06 | Giant Bubble Machine | Rope pull | Dia. 800 mm, H 1900 mm | 220 V / 160 W | 75 kg | 2 |
| 07 | Bubble Portal | Rope pull, walk-in | Dia. 1200 mm, H 2000 mm | None | 130 kg | 1 |
| 08 | 4D Bubble Machine | Manual props + fan | Dia. 1000 mm, H 500 mm | 220 V / 85 W | 25 kg | 3 |
| 09 | Super Bubble Cannon | Rope pull | 1200 x 900 x 1400 mm | 220 V / 85 W | 62 kg | 2+ |
| 10 | Mini Bubble Cannon | Rotary handle | 1200 x 900 x 1400 mm | 220 V / 85 W | 62 kg | 2+ |
| 11 | Bird Nest Bubble Machine Powered | Rotary handle + fan | Dia. 1000 mm, H 2200 mm | 220 V / 85 W | 62 kg | 2+ |
Dimensions are standard; housing size, height and colour can be built to your site. Packing volumes, crate sizes and container loading plans are issued with every quotation. Bubble liquid concentrate is supplied with the equipment and can be reordered separately.
Where this equipment works
Common questions
Do the bubble machines need electricity?
Most models are hand-cranked and completely unpowered. The 4D and fog cannon series use 220V for continuous fan-driven output, and the rotating, portal and giant units offer a 220V option where staff can supervise.
How much bubble liquid does it use?
Consumption is low because the film is formed on a rotating ring rather than sprayed. A venue typically refills once per operating session; we supply the recommended concentrate and mixing ratio.
Can we choose the color and add our logo?
Yes — six standard colors are stocked across the range (orange, red, yellow, blue, green, purple, with pink on the spray series). Custom colors, signage and logo placement are available at standard product pricing.
Which model should we start with?
For a first purchase or a rental business, start with the pull-type or spray unit: lowest cost, easiest to move. For a paid photo zone, the rotating or portal unit earns per visitor. For a large open plaza, the 4D or fog cannon covers the most area.
Can several machines run as one themed zone?
Yes. A typical "bubble garden" combines a rotating unit as the anchor, a portal as the photo moment, a giant bubble unit as the spectacle, and DIY crank units at child height around the edge. We lay this out to your site plan.
Send your floor plan, get a line-by-line quotation
Tell us the site dimensions, target age group and budget range. Manager Liu replies with a layout proposal, specifications and itemised pricing — usually within one working day.


